Festo Pressure Sensor SPAN
The pressure sensor SPAN is suitable for monitoring compressed air and non-corrosive gases. Because of its compact size, it can be used in many gas circuit branches. The measurement method is based on a piezoelectric manometer, which is used to measure relative pressure. According to different sensor variants and selected parameters, the pressure value can be transmitted as a switch signal, an analog signal, or via IO-Link. Gas source network monitoring (whether there is pressure) Pressure reducing valve monitoring (pressure is within the set point range) Vacuum (adsorbed workpiece) Leak test (gradual pressure drop) Object detection (whether there is back pressure) Use teaching function or input Parameter value to monitor and set the pressure threshold, pressure range or differential pressure ECO mode, the display screen can be turned off, the security password can be selected, and the four-digit password can be freely selected. The adjustable low-pass filter is used to smooth the force signal and amplify the analog output , To enhance signal dynamics, offset compensation minimum/maximum storage, used to monitor the air source settings on a sensor (host) can be transmitted (copy) to the same sensor (device) integrated serial communication, using IO-Link 1.1 The two switch states and the measured pressure value are cyclically transmitted. The sensor parameters can be set remotely by the IO-Link master station. The sensor is easy to replace, and the parameter setting is automatically completed (hot plug). Sensor identification, diagnosis and display can be realized through IO-Link. teach.
General pressure measurement: pressure and vacuum 13 kinds of pressure measurement ranges All common pressure units Optional test report.
Easy to operate: clear two-line display, configurable perimeter of the entire display, and red menu navigation is intuitive.
Quick installation: L1 plug for quick commissioning of M8 adapters to ensure maximum flexibility. Multiple installation options QS4 quick plug connectors.
Switchable electrical output: multiple switch functions, switch output (PNP/NPN, NO/NC), analog output (0...10V, 1...5V, 4...20 mA).